Home Grinding Machine
Vibration Grinder
1000L Horizontal Grinder
1000L

This machine does excellent jobs on finishing of stainless steels , ferrous , steels ; cast iron ,non-ferrous metals such as aluminum copper , brass , zinc , alloies and porcelain jade stones, corals, agate, suthetic resins, plastic, bamboo, wood, etc.

The workpieces could  be grinded and polished to a glossy finish by selection of washing clean, removing rust and burrs, mediums, componds and adjusted frequence of vibration moter.

 

規格表

 

 

 

 
Octagonal-Drum Grinder
vt-120

Jofull Oct-Drum Grinder:The machine container, an octagon drum tapered on both ends, is specially designed to enhance mixing of the products with the grinding material so as to ensure best efficiency and good products of uniform quality.

 

 

 
40L Centrifugal Grinder
KT-40High-speed centrifugal grinder uitable for diminutive rough grinding and polish grinding. Fast grinding, no deformation and collision.
 
80L Vibratory Finishing Machines
80L

With high frequency vibration , the
workpieces could be grinded, cutted and polished to a g|ossy surface. It moves
in tespiral rolling flow while mixing workpieces with grandstones , steel point
, grinding , compounds , etc. Specially , it is available for workpieces of easy
deformation , ports of irregular contour with holes , and/or dead corners.

The products will be equable in quality . Spot check can be made while the
machine is working . So , it will safe time and ensure good quality.

 
600L Vibratory Finishing Machines
600L

With high frequency vibration , the
workpieces could be grinded, cutted and polished to a g|ossy surface. It moves
in tespiral rolling flow while mixing workpieces with grandstones , steel point
, grinding , compounds , etc. Specially , it is available for workpieces of easy
deformation , ports of irregular contour with holes , and/or dead corners.

The products will be equable in quality . Spot check can be made while the
machine is working . So , it will safe time and ensure good quality.

 

 

 

 
400L Vibratory Finishing Machine

400L With high frequency vibration , the
workpieces could be grinded, cutted and polished to a g|ossy surface. It moves
in tespiral rolling flow while mixing workpieces with grandstones , steel point
, grinding , compounds , etc. Specially , it is available for workpieces of easy
deformation , ports of irregular contour with holes , and/or dead corners.

The products will be equable in quality . Spot check can be made while the
machine is working . So , it will safe time and ensure good quality.

 
350L Vibratory Finishing Machines
350L With high frequency vibration , the workpieces could be grinded, cutted and polished to a g|ossy surface. It moves in tespiral rolling flow while mixing workpieces with grandstones , steel point , grinding , compounds , etc. Specially , it is available for workpieces of easy deformation , ports of irregular contour with holes , and/or dead corners. The products will be equable in quality . Spot check can be made while the machine is working . So , it will safe time and ensure good quality.
 
150L Vibratory Finishing Machines
60L With high frequency vibration , the workpieces could be grinded, cutted and polished to a g|ossy surface. It moves in tespiral rolling flow while mixing workpieces with grandstones , steel point , grinding , compounds , etc. Specially , it is available for workpieces of easy deformation , ports of irregular contour with holes , and/or dead corners. The products will be equable in quality . Spot check can be made while the machine is working . So , it will safe time and ensure good quality.
 
320L Vibratory Finishing Machines
320L With high frequency vibration , the workpieces could be grinded, cutted and polished to a g|ossy surface. It moves in tespiral rolling flow while mixing workpieces with grandstones , steel point , grinding , compounds , etc. Specially , it is available for workpieces of easy deformation , ports of irregular contour with holes , and/or dead corners. The products will be equable in quality . Spot check can be made while the machine is working . So , it will safe time and ensure good quality.
 
<< Start < Prev 1 2 Next > End >>

Page 1 of 2